FULMER RESIDENCE
ARCHITECTURAL PLANS - R04 - NOVEMBER 15, 2026

DOCUMENTS
Architectural floor plans. Structural and trade documents are separate.
Coordinate the complete permit submission with the project design professional.

PRINTING
Sheet size: 36 x 24 inches. Print Actual Size / 100%; disable Fit / Shrink.
A101: 1/4 inch = 1 foot.
A102-A105: 1/2 inch = 1 foot. Pantry inset: 3/4 inch = 1 foot.
A501: enclosure plan 1 inch = 1 foot; elevation not to scale.
A601: schedules, not to scale.

DIMENSIONS
Wall layout: stud or masonry faces, unless noted otherwise.
Appliance enclosure: finished faces. Whole or half inches only.
Nominal leaves and rough-opening reservations are separate schedule entries.
Confirm manufacturer rough openings, buck details and product approvals before framing.

R04 REVISIONS
- Refrigerator north return aligned with the pantry west finished face.
- Refrigerator front positioned for a 48-inch closed aisle and full door operation.

PLAN FEATURES
- General notes standardized; garage-door wind-load and product-approval requirements added.
- Standard 36 x 80 inch hinged leaves where the available wall geometry permits.
- 32 x 80 inch leaves at the sensory entrance, sensory storage, primary WC and primary closet.
- 28 x 80 inch pantry leaf. Standard 60-inch and 48-inch closet bifold assemblies.
- Two 36 x 80 inch leaves at the music room.
- New privacy doors at the primary bedroom and primary bathroom.
- Closing doors at the pantry, coat/linen closet and sensory storage closet.
- Nominal 8-foot sensory-room slider; final rough opening per selected unit.
- 30 x 21 inch powder vanity envelope for door-swing clearance.
- 37-inch-wide x 72-inch-high refrigerator enclosure; 33-1/2-inch-deep north return.
- RF90F29AECR appliance set-out and operating clearances on A501.
- Both primary lavatory origins retained.

EDITABLE FILES
DXF: inches; northwest project origin; positive X east and positive Y north.
Layers separate stud/masonry cores, finishes, openings, door swings, fixtures,
opening tags and the A101 dimension strings. Enlarged set-out dimensions are in the PDF.
SH3D: revised architectural wall and opening reservations. Its 24 native dimension
lines measure finished clear or exterior faces; use PDF framing dimensions for set-out.
CSV: opening schedule. JSON: layout and validation data.

APPLIANCE REFERENCE
Samsung RF90F29A dimensional / installation specification, model RF90F29AECR.
https://image-us.samsung.com/SamsungUS/home/home-appliances/refrigerators/bespoke/onelaunch-pdf/RF90F29A_V8.pdf

The original source file and issued R02 / R03 files are preserved.
